Monday, May 8, 2017

HOW TO Rotate Vernee Apollo X 2017


Rotate Vernee Apollo X
Vernee Apollo X 
The Apollo X has earned the title of phablet for its fantastic screen of 5 and a half inches (5.5). In this tutorial we will guide you to obtain root access on the Vernee Apollo X mobile phone with Android 6.0 Marshmallow operating system and Mediatek MT6797 chipset set .

This mobile device can be rooted very easily, as long as we do not forget to make the pre-root configurations , which in addition are important for this and any other root process.

This setting is simply  Enable OEM unlocking and enable USB debugging . These options will be found in the menu of the developer, which when hidden by default, we will have to make it visible.

To activate the development options enter the settings of the phone -> About the Device and press seven times continuously on Compilation Number .

How to Rotate Vernee Apollo X


ATTENTION! We recommend reading the numerous advantages as well as disadvantages (few) leading rootear a mobile device .

Once you have made the previous settings, the following is to unlock the bootloader. When unlocking the bootloader will delete all the data and applications, leaving the phone in its initial state of factory.

Unlock Bootloader Vernee Apollo X

Download the adb / fastboot tool and install the drivers included in the file.



We connect the phone on with the computer and run the run-adb.exe file

We type adb reboot bootloader and press enter to restart the phone with fastboot mode.


Enter the command fastoboot oem unlock followed by enter.

On the Apollo X screen a warning will appear, we accept it by pressing volume up and wait until it finishes and we see OK in the console.

When finished, type fastboot reboot to reboot the device to the system.


We re-entered the phone settings to repeat the first steps with which we enabled USB debugging and activated OEM unlocking.

Download the root files for Vernee Apollo X and extract them to the desktop of the PC.

Trasferimos file SuperSU.zip  within the external memory of the phone.

Copy recovery.img to the folder of the adb files we used at the beginning to unlock the bootloader.

We reboot the mobile phone again using adb ( adb reboot bootloader ) and started our Apollo X in TWRP recovery with the command fastboot boot recovery.img

Note : This will not flash the custom recovery permanently, will only start TWRP temporarily to apply root and then restart will continue with the original recovery .

In TWRP enter Backup -> select the boxes  Nvram , Boot , System and Data .

Press Select Storage -> ExtSD or microSD and  hit OK and slide to save a system-wide backup of the phone to the SD memory.

Return to the starting position of TWRP and enter Install.

Open the file SuperSU.zip and slide to begin its installation.

Wait until it is finished and press Reboot -> Power Off to turn off the terminal.

Finally we turn on the phone normally and look for a new app called SuperSU   On the phone's desk.

Open SuperSU, enter the configuration of this to check the box Activate Superuser and ready, our Vernee Apollo X will be rooted.

Load disqus comments

0 comments